Burnt sienna, ultramarine, cadmium yellow - these words sound like mysterious spells to the uninitiated ear. In fact, these are just names of colors, although a certain magic is, of course, present in them. One has only to pick up a brush and apply a few drops to the palette, and the imagination immediately comes to life. And all that remains for the artist is to mix the paints correctly to create real miracles.

It is sometimes difficult for novice artists to navigate the choice of colors for their painting, especially if there are many colors in their watercolor set. This is why it is recommended to buy paints with a smaller variety of shades, because it is much more interesting and, most importantly, more useful to mix the paints yourself. Ready-made colors often turn out to be quite harsh, far from natural muted tones. But a palette created with your own hands will not only help you find what you need for the desired image, but will also serve as a source of imagination and useful knowledge.

All shades of colors are divided into warm and cold. These names are absolutely telling; warm colors are sunnier, more summery: orange, red, yellow. Cold, respectively winter, refreshing: blue, light blue, violet.

The colors on the palette interact with each other, forming absolutely incredible variations. However, there are general trends, which are reflected in the so-called Itten circle. This is a model of combining primary and secondary colors.

The circle not only shows how secondary colors are formed from primary ones, but also visually divides them into warm and cold, respectively, some on the right, others on the left. It is important to understand that we are talking about base colors, not shades. After all, in comparison, some will turn out to be warmer, others colder.

Here is a small table on mixing primary colors.

Rules for mixing paints

To mix watercolor paints correctly, you need to know some of their features and be sure to take them into account when applying them to paper. It's about not only about the division into warm and cold tones, but also about the hiding power of some colors, i.e. ability to overlap previous layers. Different shades are obtained not only by mixing two colors, but also by varying their quantity, as well as the amount of water used. For example, mixing the classic combination of yellow and green, when adding more yellow it will gradually change to a lighter lime green, and may even return to the original element.

Colors that are close to each other when mixed will not give a pure tone, but with their help you can get very expressive shade, it will be called chromatic. If you combine colors located on opposite sides of the color wheel, you can get an achromatic, grayish tone. For example, a combination of orange with green and purple will give this effect.

Some paints give an undesirable reaction when mixed. It's not just about dirt on the drawing, it can lead to cracking of the paint layer, as well as to its darkening when drying. The combination of zinc white with cinnabar has a beautiful light pink tone, but later this combination darkens and becomes inexpressive. Therefore, it is, of course, considered optimal to achieve brightness and multi-color by mixing a minimum number of colors. Remember that some combinations give a lasting effect, while others are completely unacceptable.

How to get yellow color when mixing paints

Yellow is one of the three basic colors, so it is impossible to obtain it by mixing it in its pure form! However, you can achieve some results by playing with shades that are close to the palette. For example, to get gold, you will need regular yellow and a drop of red or brown. A good option is also to make them yellow with red and adding white.

How to get orange color when mixing paints

It is much more productive to mix yellow paint to create orange. It is formed from a mixture of yellow and red. Adding a little brown and red can make it tangerine or gold, depending on the amount of ingredients. Bright orange comes from classic orange with brown and white.

How to get a mint color when mixing paints

How to get black by mixing paints

Each watercolor set contains black, but if for some reason you don’t have it, or you need a very dark shade, you can mix it yourself. You will need to combine red, yellow and blue in equal proportions. Great color comes from blue and brown. Also suitable for mixing are red, green, yellow, and purple. Cobalt yellow, cobalt blue and pink madder will give a soft black color.

How to get green color by mixing paints

Green comes from yellow and blue. However, in watercolors in its pure form it is rarely used. Much more popular colors are sunny green or olive green, midnight green, their combination and other options. Solar green uses ultramarine and cobalt yellow, olive is prepared from the same flowers with the addition of burnt sienna, and midnight is made from FC blue, yellow and a drop of black.

How to get turquoise color by mixing paints

Turquoise is better known by its other name, aquamarine. On the color spectrum its place is between green and blue. Therefore, they will be needed for mixing. You will need a slightly larger amount of blue cyan than green. However, this depends on the required color intensity. For a more subtle turquoise, you can add a drop of white or light gray paint. For a rich aquamarine, you will need to take a bright shade of blue, green and a little yellow.

How to get burgundy color when mixing paints

The burgundy color owes its name to the French wine of the same name. This is a solemn, deep color, you can mix it with three parts red and one blue. For a warmer shade, you can introduce a little yellow, or combine bright scarlet in half with brown. A cooler tone will be obtained from red, brown and black; it comes out so rich that it must be diluted with water.

How to get blue color by mixing paints

It’s very easy to get blue color in watercolors; just dilute ultramarine with water, and you’re done. However, for those who are not looking for easy ways, there are always a couple interesting ways. One of them is the use of white: for 2 parts of ultramarine you will need one part of white paint. You need to dilute the blue color gradually to adjust the saturation of the tone. For a bright blue color you will need the same blue, a drop of red and white. Another shade can be obtained by adding to this mixture one part of not red, but green paint.

How to get crimson color when mixing paints

Bright and energetic crimson color has a whole range of shades. The main one can be obtained by combining red, blue and a small amount of white. To tone down a too flashy color, add a little black. Instead of black, you can use brown, and instead of blue, turquoise or cyan, or purple, the results will be very extraordinary.

How to get brown color when mixing paints

Get Brown color Can different ways. The simplest one is mixing red and green paints. It can also be made from purple and yellow, the more yellow, the lighter the tone. Another way is to use red, blue and yellow, but you need to mix them gradually, adding more paint to adjust the shade, otherwise a black color may form, especially if red and blue predominate. A good tint comes from mixing orange and blue.

How to get purple color by mixing paints

From school curriculum It is known that purple comes from red and blue colors. However, in reality this is not entirely true. It is quite difficult to obtain a high-quality bright shade, and what comes out of these two colors is more like a nondescript burgundy. So, in order for a bright, rich lilac color to come out in a company of red and blue, the latter must predominate. In this case, the shade of red should be taken as cold as possible, otherwise there is a high probability of mixing brown rather than purple. Blue also has its own requirements - it should not contain any greenish notes, take only in its pure form, for example, cobalt blue or ultramarine. To lighten the final tone, you can use big amount whitewashed Important nuance, this is that after drying the color fades a little.

How to get blue by mixing paints

Blue is a basic color and cannot be mixed with other colors. But with the help of blue paint and auxiliary paints you can get many shades of it. For example, from bright ultramarine with white lead you can get sky blue. For a rich blue tone, take ultramarine with dark turquoise. A beautiful blue-green comes from blue with a little yellow. White will make this shade paler. The famous Prussian blue is obtained from mixing blue and green in equal parts. If you take 2 parts blue and 1 part red, you get blue-violet. And if you take pink rather than red, you get royal blue. A complex gray-blue color, excellent for drawing shadows, can be obtained from blue and brown. A rich dark blue will come out of blue and black, combining two to one.

How to get pink color by mixing paints

Usually pink color obtained from a combination of red and white, its shade will depend on the proportions. But you can also experiment with various types red The bright scarlet gives a wonderful effect, the pink color turns out to be very pure. Brick red gives a peachy tint. And bloody alizarin and white form a fuchsia color. By adding drops of purple or yellow to the mix, you can get unexpectedly interesting results. Not everyone accepts the use of white in watercolor, then you can get pink simply by diluting any red color with water. In a low concentration, this will be what you need.

How to get beige color when mixing paints

Beige or flesh color is necessary for the artist to depict people, faces, portraits, etc. Delicate beige can be obtained from white with the addition of ocher, cadmium yellow and red, sienna and sometimes ubra in minute quantities for light shading. The ratio of ocher in comparison with other components will be higher, all ingredients need to be introduced little by little, adjusting the required color intensity. Unfortunately, there is no exact recipe; each artist has his own vision of this issue.

How to get lilac color when mixing paints

The lilac color is quite close to purple, they are even called related. They are both cool shades and stand on color wheel close enough. Actually, the main recipe lilac color- this is the dilution of violet with white or water.

How to get gray color when mixing paints

IN watercolor paintings You will never find black shadows; they are usually drawn with the same colors as the rest of the details, but with the addition of a darker element, for example, gray. This color in watercolor can be obtained by combining black with a large amount of water or white. Interesting shades are obtained from cobalt blue with the addition of burnt sienna or burnt umber.

Mixing oil paints, mixing technology

Mixing oil paints has a slightly different specificity, unlike watercolor. Although the basic recipes for obtaining certain flowers are, of course, general. Basic Mixing Techniques acrylic paints:

• Combining colors on the palette, i.e. physical, to obtain a new tone or shade for the purpose of applying to a drawing. If one of the paints is lighter, then it is applied in small strokes over the dark one, provided that both paints have the same covering properties. When clear paint is mixed with opaque paint, the result is opaque paint. If two transparent paints are taken, then the result will be transparent. With this method, a decrease in the purity and intensity of tones is inevitable.
• The method of overlaying paints, otherwise known as glazing, involves layering transparent paints on top of each other directly on the image. Of course, the previous layer must be completely dry.
• Color joining method. If you apply brush strokes very tightly together, then visually mixing of these colors occurs, like a kind of optical illusion.

Oil Paint Mixing Chart

Mixing acrylic paints, technology

Acrylic paints - great option for beginning artists and painting lovers. They are universally suitable for paper, fabric, glass, wood, etc. Their only drawback is their rather high cost, and therefore acrylic sets usually do not have a very rich palette. But nothing prevents us from expanding it using mixing technology. You must have 7 colors: red, pink, yellow, blue, brown, white and black. And then, using a special table, you can easily mix acrylic yourself.

Acrylic paint mixing table

Mixing gouache paint colors

When choosing gouache, you should not focus on large sets; they look very impressive and presentable. But in fact, you will have to overpay for completely unnecessary colors. It is much better to focus not on the number of jars, but on their volume. After all, when the primary colors run out, you will still have to buy new paints, and the unused ones will remain as dead weight. Moreover, it is very easy to get new colors and shades of gouache, as simple as holding a brush in your hands. There are no special rules here, except that you will need a color combination table.

Gouache paint mixing table

Knowledge of color mixing options can be useful not only in professional activity artists. Individual design of a living space often poses the question to the designer of how to achieve this or that interesting undertone. The proposed combination options and color mixing table will help you achieve the desired effect.

Everyday life is filled with a wide range of different colors. To get the right one, you need to know the intricacies of combination.

Blue, red and yellow paint are the three pillars on which a wide palette of halftones rests. It is impossible to form these colors by mixing other colors. At the same time, combining them with each other gives an unusually large number of combinations.

Important! You can create a variety of shades by mixing only two colors by changing their proportions.

Depending on the volume of one part of paint added to another, the resulting result approaches one or another original color. One of the most famous examples is the mixing of blue and yellow, resulting in the formation of green. The resulting result, when adding new portions of yellow paint, will gradually change, getting as close as possible from green to yellow. You can return to blue by adding more of the original element to the green mixture.

Mixing chromatic colors that are located close to each other on the color wheel produces a paint that does not have a pure tone, but has an expressive chromatic hue. Combining colors that are on opposite sides of the chromatic circle will result in an achromatic tone. An example is combining orange or purple with green. That is, a mixture of colors located closely in the color wheel gives a rich chromatic shade; the maximum distance of colors from each other when mixed leads to a grayish tone.

Individual paints, when interacting, produce undesirable chemical reaction, which may result in cracking of the decorative layer. IN in some cases the resulting background may darken or gray. A good example is the mixture of white lead and red cinnabar. The attractive pink color darkens over time.

It is optimal when the impression of multicolor is achieved by mixing a minimum number of colors. At the same time, it is important to consider which paints, when mixed with each other, give a lasting result, and which ones are unacceptable to combine. The knowledge gained allows us to eliminate paints that fade or darken in the future from work.

The table of unwanted mixtures below will help reduce the risk of erroneous combinations:

Having tried the examples given in practice, future painters and designers will gain valuable professional experience.

Methods for obtaining red and its shades

Red is one of the three primary colors and is necessarily present even in minimal sets. But for mass printing, magenta tone is used. The answer to the question of how to get red is quite simple: mix the proposed magenta with yellow in a 1:1 ratio. There are other options for getting red when mixing paints:

The main red is located in the center. Next are the options for mixing. The next circle is the result of combining the first two colors. In conclusion, color options are presented when added to last result red, black or white paint.

Blue and its shades

Blue is considered a primary color, so to form all its shades you will need blue paint.

Attention! No combination of other colors produces a shade of blue, so the presence of this paint in the kit is mandatory.

Even with a set of 12 colors available, the question periodically arises of how to get blue. The classic tone is called “royal”, and in a set of acrylic paints the main color is often ultramarine, which has a bright dark shade with a purple undertone. A lighter effect can be achieved by mixing blue and white in a 3:1 ratio. Increasing the white leads to a lighter tone, up to a sky blue. If you want to achieve a moderately rich result, dark blue paint is mixed with turquoise.

Let's look at what colors need to be mixed to get shades of blue:

• The effect of a dark blue-green tone is achieved by mixing blue and yellow paint in equal proportions. Adding white paint will result in a lighter shade while reducing the brightness due to the combination of the 3 elements.
• The creation of “Prussian blue” is carried out by mixing 1 part of the main blue and adding 1 part of a composition of bright green and light green. A rich and deep shade can be diluted with white, and its purity will not change.
• Combining blue and red in a 2:1 ratio produces blue with a hint of purple. Adding white allows you to lighten a dark and rich tone.
• Royal blue is distinguished by its brightness; a similar effect is achieved by mixing the main blue with mangento pink in equal parts. An admixture of white traditionally brightens the result.
• Combination with orange gives a gray mass. Replacing orange with brown in a 1:2 ratio to the base creates a dark color with a complex gray-blue tint.
• The formation of dark blue occurs with the help of an admixture of black in a ratio of 3:1.
• You can create a blue tone yourself by mixing the main color with white.

A small table of combination options is presented below:

Green color palette

Solving the problem of how to get green if it is not in the set is quite simple: combine yellow and blue. A rich palette of green halftones is created by changing the proportions of the original components and adding additional elements that perform the function of darkening or lightening. Black and white paint plays this role. The olive and khaki effect is achieved by mixing two main elements (yellow and blue) and a slight admixture of brown.

Comment! The saturation of green depends entirely on the quality of the constituent elements: intense tones of the source materials guarantee a bright result.

If green is obtained by mixing, then all subsequent undertones will be duller. Therefore, it is better to experiment with the range of green if you initially have a ready-made primary color. There are many combination options:

• A combination of blue and yellow in equal proportions produces a grassy green.
• Increasing yellow to 2 parts and adding 1 part blue results in a yellow-green effect.
• An experiment on the contrary in the form of a blue-yellow proportion of 2:1 will allow you to obtain a blue-green tone.
• If you add ½ part of black to the previous composition, you will achieve a dark green effect.
• A light green warm tone is formed from yellow, blue and white paint in a ratio of 1:1:2.
• For a similar light green shade, but a cool tone, you need to take yellow, blue and white bases in a 1: 2: 2 ratio.
• Dark olive color is formed by mixing equal parts of yellow, blue and brown paint.
• The gray-brown tone is obtained from similar elements in a ratio of 1:2:0.5.

The expressiveness of the green color is directly dependent on the original elements; accordingly, the brightness of the halftones is based on the saturation of the green. The graphic palette gives a clear idea of ​​the mixing options:

As in the case of the red circle, the main paint is located in the center, followed by mixing options, then the result of the experiments. The final circle is the shades of the previous level when adding base, white or black paint.

Other combination options

There are many other techniques to create the desired effect by adding some kind of dye to the base color. The answer to the question of how to get ivory color is multifaceted and depends on the surface where you plan to apply the paint. The simplest option is to mix snow-white basic basis with yellowish. For example, yellowish ocher or a minimal amount of strontium is added to white. To tint paper, a small amount of potassium permanganate is diluted in water. A light pink tint indicates a correctly diluted solution. A cotton swab, brush or sponge is moistened with the resulting composition, after which the surface of the paper is treated.

Advice! For double-sided tinting, the sheet can be dipped in a container with a solution of potassium permanganate for a couple of minutes. After drying, it will acquire the desired ivory effect.

There are also several ways to get black:

• by mixing the three basic colors of red, blue and yellow;
• when combining cyan, magenta and yellow;
• a combination of green and red, but the result will not be 100% clear, but only close to the desired effect.

We will try to answer the most popular questions about mixing options:

• How to get raspberry color: the base is blue with the addition of red, white and brown.
• You can get turquoise color, whose second name is aquamarine, by mixing blue and green. Depending on the proportions, the tones of the new shade range from soft pastels to intense and bright ones.
• How to get yellow? It belongs to the basic ones and it is impossible to obtain it by combining other paints. Something similar to yellow can be created watercolor paints when combining green and orange or red. But it is impossible to achieve purity of tone in this way.
• How to get a brown tint? To do this you will need basic paints: red, yellow and blue. First, a small amount of yellow is added to the red (in an approximate ratio of 10:1), then the volume is gradually increased until an orange tone is obtained. After which they proceed to the introduction of the blue element, 5-10% of the total volume will be enough. Minor adjustments to proportions will produce a wide variety of brown effects.
• Combining black and white elements in different proportions gives a diverse range of gray tones.

As you can see, there are options to achieve the desired effect in creative process an innumerable variety of designs. The information presented will be supplemented by a table with options for mixing colors and video:

In this article we will look at what needs to be mixed to get brown color in paints.

Such a noble and calm color as brown has always dominated the clothing of rich and noble representatives. By the way, its main characteristic is stability and stability. But often the palette does not have this color or its required shade. Yes, and young or even experienced artists must be able to select correct colors to create your own color scheme brown spectrum. And our recommendations will help in this aspect.

How to get brown color when mixing: 3 ways

Before rushing to the color scheme and brushes, you need to remember what colors there are. They are divided into two groups – basic and additional. There are also two more subgroups - composite and complex. All of them make up the design of four groups of basic colors.

Remember - primary colors cannot be obtained by combining any palettes. By the way, they are the ones that become the basis for creating other colors. Moreover, having black and white on hand, you can extract absolutely any color.

IMPORTANT: Brown belongs to the group of complex colors.

We offer three basic methods for obtaining brown color.

Green (blue+yellow) with red

• Even schoolchildren know that brown comes out when you mix two colors together - green and red. This is the case if we talk about the primary and composite colors.
• But the challenge is still to create a green tint. As easy as pie! Take two primary colors - yellow and blue.
• You need to take an equal number of different shades. But take into account your wishes.
  • If you want the final color to be darker, then add a little more of blue color, but already in the finished green color.
  • If, on the contrary, you want to make a more transparent shade, then initially take a little more yellow.
• After receiving the secondary color, we begin making the tertiary color. To the green color you got, you need to add a little red tone.
• It is important to introduce red paint, and not vice versa! After all, it is the fundamental tone that regulates the degree of darkness and saturation brown tint. If you add too much red coloring, then you will get more of a brick tone.
  • But also keep in mind that the red color makes brown so warm (in large quantities it can even create a rust effect), but green, on the contrary, will make it even a little grayish and cold.

Orange (yellow+red) with blue

• The first thing you need to do is take red. And add yellow to it. By the way, it needs to be introduced gradually and in small quantities.
• On average, yellow should be only 10% of the volume of red. It's important to get a dark orange. But keep in mind that too much red coloring will create a reddish brown color.
• Blue paint will need even less - 5-7% of the total volume. You also need to add gradually, in small portions and stirring the ingredients well.
• Of course, adjust the tone and saturation of the brown color using the blue tint.

Violet (red+blue) with yellow

• Red and blue colors should be taken in equal quantities. Then you can get a noble, and even royal shade of purple, which will have the desired saturation and warmth.
• Then, you need to introduce yellow color little by little. It will lighten the resulting purple, so keep an eye on the amount. If the color is predominantly yellow, then the brown color will be lighter and warmer. The violet tone does the opposite.

IMPORTANT: Too much yellow paint will create an ocher tint.

How to make a light brown color from paints, gouache when mixed?

To get a light brown color, you need to give the yellow color a predominance. But! Let us repeat that too much of it will make the color look like ocher. And, of course, it all depends on the desired lordship.

• To whiten brown color, you need add white. Yes, it's that simple. The more you add, the lighter the final color will be.
• But don’t overdo it, brown is a warm color and white will neutralize this characteristic. Therefore, introduce very carefully, gradually and in small portions (literally, 1% of the total mass of paints).
• Although adding the previous color will help correct the situation.

How to get a dark brown color when mixing paints and gouache?

If we talk about previous mixing options, more blue or green will make a darker brown. But they will also add their own nuance. There is another, simpler and faster way to get a dark brown color.

• Just add black paint. But you need to work with it extremely carefully, since a small dose of excess paint will simply turn it into black.
• Therefore, add paint in tiny portions and take note of one rule - conduct experiments with a small amount of paint.

• By the way, so as not to make a mistake with in the right color, mix a little black with white. But leave the first shade predominant. Just make it a little softer as it can quickly eat up the brown color.

How to get chocolate when mixing paints or gouache?

To create a chocolate color, you need to tinker a little. The most unencumbered scheme is to choose the right tones of orange and blue. But there is another possible option.

• Combine yellow and blue paint to create a dark green color. In another bowl, combine red and a drop of yellow to create orange.
• Now combine the two resulting colors. And in the end you get the color of green grass or grass green.
• Now you need to create a bloody red color. To do this, combine the same orange and red palette.

• In conclusion, it remains to combine the two complex colors obtained.
• And as a result we get the color of real chocolate.
  • If you want milk chocolate then add a drop of white paint
  • A mixture of white and yellow will give an additional golden tint to the color
  • Dark chocolate is again obtained by adding black paint.
  • But yellow with chocolate will help you get a beautiful and even brown color

How to get coffee color when mixing paints or gouache?

• Coffee color can be obtained by adding the same black gouache. Also, you need to mix according to technology - orange paint plus blue color. In this case, you can achieve the desired tone.

• Alternatively, you can achieve the desired color using a composition of purple and orange paint. If necessary, you need to add a drop of black tint.

Color mixing: table

For clarity, we would like to provide you with a table that will show all possible versions removal of brown color and its range. To get a brown color, you need to mix the component colors, adding the main shade to them. True, there are other options where the composition includes not just secondary colors, but even complex palettes.

The color mixing table allows you to learn how to get the right one when mixing two or more colors and shades.

This table is used in various fields art - fine art, modeling, and others. Can also be used in construction when mixing paints and plasters.

Color Mixing Chart 1

Color mixing chart 2

Mixing paints
black= brown+blue+red in equal proportions
black= brown+blue.
gray and black= blue, green, red and yellow are mixed in equal proportions, and then one or the other is added by eye. it turns out we need more blue and red
black= it turns out if you mix red, blue and brown
black=red, green and blue. You can additionally add brown.
bodily= red and yellow paint... just a little bit. After kneading, if it turns yellow, add a little red, if a little yellow paint turns pink. If the color turns out to be very saturated, add a piece of white mastic and mix again
dark cherry= red + brown + a little blue (cyan)
strawberry= 3 parts pink + 1 part red
Turkiz= 6 parts sky blue + 1 part yellow
silver gray= 1 hour black + 1 hour blue
dark red= 1 part red + a little black
rust color= 8 hours orange + 2 hours red + 1 hour brown
greenish= 9 hours sky blue + a little yellow
dark green= green+a little black
lavender=5 parts pink + 1 part purple
bodily= a little copper color
nautical=5h. blue+1 hour green
peach=2h. orange + 1 tsp. dark yellow
dark pink=2h. red+1 hour brown
Navy blue=1h. blue+1h. Sereneviy
avocado= 4h. yellow + 1 part green + a little black
coral= 3 hours pink + 2 hours yellow
gold= 10 hours yellow + 3 hours orange + 1 hour red
plum = 1 part purple + a little red
light green= 2 hours purple + 3 hours yellow

red + yellow = orange
red + ocher + white = apricot
red + green = brown
red + blue = violet
red + blue + green = black
yellow + white + green = citric
yellow + cyan or blue = green
yellow + brown = ocher
yellow + green + white + red = tobacco
blue + green = sea ​​wave
orange + brown = terracotta
red + white = coffee with milk
brown + white + yellow = beige
light green=green+yellow, more yellow,+white= light green

lilac=blue+red+white, more red and white, +white= light lilac
lilac= red and blue, with red predominating
Pistachio paint obtained by mixing yellow paint with a small amount of blue

Brown is a versatile color that has many possible uses, but it is not always found in art supply sets. Fortunately, various shades brown can be obtained by mixing three primary colors: red, blue and yellow. Just mix these three primary colors and you get brown. You can also start with a secondary color, such as orange or green, and add a primary color to it until you get brown. To achieve the shade of brown you want, add more of one of the primary colors, use a little black, or mix two or more different shades.

Steps

Mix primary colors in equal proportions

Squeeze a small drop of each color onto the mixing surface. Place red, blue and yellow paints next to each other on a palette or piece of paper. The exact amount depends on how much brown paint you need. It is important that there is an equal amount of each paint.

• Leave some space between flowers. This empty space in the middle is where you will mix your different paints.
• To get brown from primary colors, you just need to mix them in equal quantities.

Advice: In principle, this combination can be used for oil sticks, watercolors or colored pencils, but the final color may not be uniform, since they are more difficult to mix.

Mix the colors completely. Run the tip of the palette knife along the inside edges of all three paints to bring them toward the center. Then use the flat bottom surface of the tool to mix the paints using increasingly wider circular movements. At the same time, you will notice that the mixture gradually acquires a rich brown color.

Add a little white to give the brown some depth. Once you have mixed the paints and got a brown color, add some white paint and continue mixing until it is completely gone. Be careful not to use too much white paint - generally no more than ⅓ of the total paint is needed.

How to get brown from secondary colors

1. Mix red and yellow together to make orange. Start with enough red paint and add yellow paint little by little until you reach a 1:1 ratio. At the same time, mix the paints until you get a dark orange color.

   • To make the brown color dark enough, you can use a little more red paint.

2. Mix orange with blue to get brown. Use a little less blue than orange - the proportion of blue paint should not exceed 35-40%. Mix the paints thoroughly until you get a chocolate brown color.

   Mix red and blue to get purple. Use these two colors in approximately equal proportions. The perfect combination red and blue will give purple, and if you deviate from exact proportions, you will get a purple or similar red tint.

   • Getting the right purple color is quite difficult. If the final mixture has a reddish or bluish tint, add a little of the opposite color to achieve balance.
   • If you add too much blue paint, the purple color will be more difficult to correct. It is easier to achieve the right shade with an excess of red.

3. Add yellow paint little by little to the purple until you get a brown color. As you mix the paints, you will notice a dirty brown tint beginning to emerge. Continue adding yellow paint in small increments until you get the color you want.

   Mix blue and yellow to make green. Squeeze out a large drop of blue and add yellow paint to it little by little. As with orange, you should start with the most saturated green and move towards the middle of the spectrum.

   • For best results, the green color should be closer to dark blue than light aquamarine.

4. Add the right amount of red paint to the green to get a brown color. Mix in just a little red at first and continue adding and stirring as needed to get a darker color. A mixture of green and red can range from an earthy olive brown to a warm burnt orange hue.

   • To get the most “real” brown color possible, the mixture should contain 33-40% red dye. If the proportion is equal, red will slightly predominate.

   Advice: The brown color obtained from a mixture of red and green is perfect for landscapes and images of nature.

   How to get different shades

   Add a little more red or yellow paint to give the brown a warmer tone. If you want to lighten or enhance the brown, simply add a small amount of one of the warm primary colors. Add paint in small portions and stir continuously until you get the desired shade.