How to get the right paint color. Rules and features of mixing two or more colors

Artists say that if there are 3 primary colors available: yellow, red and blue, then you don’t have to buy all the other colors. By mixing several colors with each other, you can get the desired shade. But what to do when there is not enough primary color? How to get yellow?

There are 2 ways to obtain the required color: use the color wheel, but in order to get a large palette of colors, you will still need to acquire a primary color. If you had these 3 primary colors, then by mixing them you could get brown, violet, grass and orange. It's simple, but we have a slightly different task.

How to get yellow

It turns out that the required color cannot be obtained by mixing other shades. In order to make the desired shade of this color, you need to mix several shades that are similar in tone. Let's say you need to get a bright, juicy yellow that turns more into orange - then you need to take the same pure yellow, add to it a few drops of red and brown, as well as white. By mixing several paint colors you can achieve the desired shade. First you need to introduce a light shade little by little. In this case it is white, and then a little dark. This way you can get a juicy, rich yellow.

How to get bright yellow

How to get the required color so that it is bright, literally acidic? This color is called “lemon”.

Your actions will be like this:

• take some of the main color (i.e. yellow);
• add a little white to it, stir;
• after the shade of the paints changes, take a thin brush or wooden stick and put a little green paint on the tool;
• add in small portions, stirring immediately;
• If you add just a little bit at a time, you can quickly create the desired shade.

How to get yellow with gold

How to get yellow with a hint of gold:

• for the main color you will need classic yellow;
• Just one drop of red is added to the paint;
• if there is no red, then just a little brown;
• Thorough kneading will allow you to achieve the desired shade.

If, when mixing several colors at once, the shade turns out to be dirty, you need to continue the stirring process. You may have overdone it and will need to add white to brighten it up.

How to get juicy yellow color

A rich yellow color with bright highlights can be created in just a few minutes if:

• take the standard yellow color;
• add a little pure white to it;
• if you need to darken the shade, add half a drop of red. Instead of red, you can use brown, but then the amount of paint should be even less.

Now you know how to get the right shade of yellow. But if you need to get that same basic color, then you don’t have to look for the answer to this question. Because it is impossible. The only thing that experienced artists recommend is for drawing watercolor paints You can mix orange and green to get the desired shade. But the result will not be yellow, but rather a bright light green with yellow highlights. You can also experiment and mix green paint with blue or red with orange. Perhaps this is exactly the shade option you needed for work. Therefore, if you don’t have enough yellow paint for creativity, you will have to go to the store and buy a base color.

Every person who has ever held a brush and paint in his hand knows that you can get a lot of shades from two or three colors. The rules for mixing and matching colors are determined by the science of coloristics. Its basis is the color wheel known to many. There are only three primary colors: red, blue and yellow. Other shades are obtained by mixing and are called secondary shades.

What colors of paint should be mixed to get brown?

Brown is considered complex; when creating it, you can use all the primary colors. There are several ways to get brown:

• Classic: green + red in proportions 50:50.
• The main trio: blue + yellow + red in equal quantities.
• Mixing: blue + orange or gray + orange. You can vary the intensity of the hue by adding less or more gray.
• Optional: green + purple + orange. This shade has a pleasant red or red tint. You can also mix yellow + purple - the color will have a yellowish tint.

What colors of paint need to be mixed to get purple?

The easiest way to get purple is to mix equal proportions of red and blue. True, the shade will turn out a bit dirty, and it will need to be adjusted.

To make the tone cooler, take 2 parts blue and 1 part red and vice versa.

To achieve lavender and lilac, the resulting dirty purple needs to be diluted with white. The more white, the lighter and softer the shade will be.

Dark purple can be obtained by gradually adding black or green to the original color.

What colors of paint need to be mixed to get red?

Red is considered a base color and is present in any artistic palette. However, you can get red by mixing violet (magenta) and yellow in a 1:1 ratio. You can also mix a carmine shade with yellow to create a more intense red. You can make it lighter by adding more yellow and vice versa. Shades of red can be obtained by adding orange, pink, yellow, and white to the base red.

What colors of paint should be mixed to get beige?

Beige is a neutral and independent color; it has many shades, which can be achieved by varying the amount of white and yellow shades added.

Most easy way get beige - mix brown and white.

To make the color more contrasting, you can add a little yellow.

Flesh beige can be obtained by mixing scarlet, blue, yellow and white. The ivory shade is created by mixing golden ocher and white paint.

Green color can be achieved by mixing equal parts yellow and Blue colour. The result will be a grassy green hue. If you add white color to it, the mixture will lighten. By mixing brown or black pigment, you can achieve emerald, marsh, olive, dark green shades.

What colors of paint need to be mixed to get gray?

Classic tandem for receiving gray- this is black + white. The more white, the lighter the finished shade.

• You can also mix red, green and white. The color will have a slight yellow tint.
• A blue-gray shade can be created by mixing orange with blue and white.
• If you mix yellow with purple and white, you get a gray-beige shade.

What colors of paint need to be mixed to get black?

Black is a basic monochrome color. It can be obtained by mixing magenta with yellow and cyan. Also, artists often mix green and red, but the resulting shade will not be jet black. Rich black color is produced by a mixture of orange and blue and yellow and violet. To get the shade of the night sky, you can add a little blue to the finished color, and a drop of white to lighten it.

What colors of paint need to be mixed to get blue?

Blue is the main color in the palette and it is quite difficult to obtain it by mixing. It is believed that it can be obtained by adding a little yellow to green, but in practice the result is more of a blue-green tint. You can mix purple with blue, the shade will be deep but dark. You can lighten it by adding a drop of white.

What colors of paint need to be mixed to get yellow?

The basic yellow color cannot be achieved by mixing other shades. Something similar happens if you add green to orange. Variations of yellow are obtained by adding other tones to the basic one. For example, lemon is a mixture of yellow, green and white. Sunny yellow is a mixture of basic yellow, a drop of white and red.

What colors of paint need to be mixed to get pink?

The easiest option is to mix red and white. The more white, the lighter the shade. It is important to know that the tone depends on which red you choose:

• Scarlet + white will give pure pink color.
• Brick red + white - peach pink.
• Blood red + violet give a fuchsia shade.
• Orange-pink can be obtained by adding yellow paint to scarlet and white.

What colors of paint need to be mixed to get orange?

Orange color can be obtained by mixing red and yellow.

• A less saturated shade will be obtained if pink pigment is added to yellow paint.
• Terracotta orange is the result of mixing base orange with blue or purple.
• Dark shades are achieved by mixing red, yellow and black.
• If you add brown instead of black, you get red orange.

We vary the intensity of the tone by adding more white or black.

Color mixing table

Primary colors (blue, yellow, red) are almost impossible to obtain by mixing other shades. But with their help you can create the entire color palette!

Knowing the basic rules of color, it will be easier to understand the decoration and get the desired shade!

Whatever you say, this color is magical, but it evokes dual feelings: on the one hand, it is a kind of sadness, and on the other, peace and tranquility. In this article we will look at how to get blue by mixing paints. Let's find out what shades exist and what they are called. Let's consider what percentage is needed to solve the problem set before us: how to get blue?

Blue color. Psychological perception

It is this shade that has attracted humanity since ancient times. He was always given Special attention. So in Ancient Egypt the process of sacrifice to the Gods was depicted in this color. In astrology it corresponds to the planet Venus. In esotericism it is used for meditation, concentration, and also for the process of self-knowledge. IN modern world psychologists have an ambivalent attitude towards this tone: on the one hand, it promotes concentration to achieve a set goal, and on the other hand, it can separate a person from reality and introduces emotional coldness into the worldview.

In psychology, various color tests, and one of the most effective is the Luscher test, according to which the tone we describe symbolizes calmness and self-satisfaction. This test can determine a person’s stress tolerance and communication abilities. Each time the test amazes with its accuracy, it’s like true friend can provide answers to questions that for a long time were brewing inside.

Shades of blue

Our described tone is noble and stylish. It hides the peace of the cold sky and the raging passion of the sea. How to get blue? Mixing colors will give a large number of related tones and halftones, the percentage recipe is varied. There are many shades of it. And how beautifully they are called! Based on the names alone, you can understand how much we love this shade, how it inspires and gives strength. So, as an example, we give the following names of shades of blue: cornflower blue, dove blue, Niagara color, cyan, ultramarine, heavenly, sea ​​wave, blue, azure, Persian blue, royal blue, indigo, Prussian blue, sapphire, blue-black. Here are the main shades of the tone we are describing. In addition to them, many semi-shades can be distinguished, that’s how multifaceted this tone is.

Even any shade can have various characteristics: blue - frivolous and playful, because it is not for nothing that they say “blue dream”, in other words, unrealistic and unrealistic. But the shade “indigo” is identified with highly developed mental abilities. Children who are mentally gifted are often called “indigos.” It is also worth taking into account a person’s tendency in clothing and in choosing an interior in favor of the specified tone, and the first thing that can be said about him is that this person has an analytical mind. But let's return to the main question: how to get blue?

Mixing colors

After all, it is the primary color, but we can get a large number of its shades using different tones. So how do you get blue when mixing colors? Consider getting "Royal Blue". To do this, you need to use blue as the main tone, adding to it a small part of black and a drop of green. As a result of this mixing, the desired shade should be obtained. How to get blue, but a brighter shade than the previous one? To do this, we use the same colors that we described above, but in this case we need to halve the amount of black. The result of mixing should be a beautiful dark blue shade.

Now let's look at what colors to get the blue color of the sea, a shade of turquoise. To do this, it is also necessary to use the main shade of our tone, and the additional one will be a green tone, taken in a ratio of one to three. You should get an unforgettable color of the sea, eye color beautiful girl, mysterious and deep, simultaneously exciting and calming. Now I would like to figure out what tones are needed to get a Wedgwood blue. In this case, the peculiarity is that the main color will be used not blue, as was previously the case, but white. To the white original tone you need to add half of our described tone. Considering the amount of base color, and as a highlight or as a cherry on the cake, add a drop of black. The result should be a peaceful, calm shade of the same tone we adore.

Let's consider this option: how to get a blue color by mixing orange colors in a very small amount with our main tone, which in this recipe we define as the original one. The result of this operation should be a heavy shade, one might even say menacing. The result obtained is identified with a dirty and harsh sky during a wild storm, when the sea roars like a wild beast, and the wind howls and tears the sails of ships.

Blue in nature

What colors are needed to produce blue in nature, you ask? In our real world at the level of physics this tone is perceived by the human eye in the range 440 - 485 nm. In other words, spectral blue color is felt when exposed to electromagnetic radiation with a wavelength whose digital value is indicated above.

Blue paint

How to get blue color artificially, you ask? As you know, natural dyes of this shade are very rare and therefore valuable. One of the dyes of the aniline series is fuchsin. Its significant drawback is that it is far from the beautiful blue tint that one would so much like to achieve; in this case, magenta gives a bluish-red tone. The result of waiting will make you disappointed.

Conclusion

In conclusion, to summarize what has been said, I would like to note that the main question of our article is how to get blue. Mixing colors in different proportions will be the answer, but do not forget that today acrylic paint of the described shade can be classified as dark blue with a purple tone. This type of shade is called "ultramarine". Moreover, the issue of mixing paints is relevant for young artists, for whom, in addition to theoretical information, practice is important. The ability to form your own style, still based on theoretical knowledge, is one of the main tasks. I would like to believe that this material will be useful and interesting.

Wall decoration is becoming fashionable in interior design various types plasters and painting them with paints. But it’s not always possible to choose the palette you like in hardware stores. Don't despair. Modern technologies allow you to get the desired result. Mixing colors of standard shades allows you to achieve the desired result. The next question arises, how to mix paints to get a beautiful tone? Let's try to get an answer.

There are quite a lot of tones. But the production of paints is based on the use of standard colors. Nowadays, non-standard colors are in fashion, which can be obtained by mixing dyes. They will tell you how to mix colors correctly the following recommendations specialists.

It has been known since childhood that the basis of all tones are three colors: red, blue, yellow.

To get other options, you need to know the rules for mixing paints. The combination of basic dyes gives a wide range of different undertones.

The secret to creating a new color scheme by mixing colors is to use basic dyes in different proportions. For example, when mixing the colors blue and yellow, we get green. If you continue to add yellow to the resulting substance, you can get tones that are increasingly closer to it. It all depends on the volumes that are connected.

On video: how to get a new color.

The nuances of combining dyes

Mixtures of colors of chromatic shades that are placed next to each other in color wheel, give a fairly bright palette. If you mix dyes that are on opposite sides of the circle, we get achromatic tones, that is, with a predominance of gray.

To get the desired result, you need to understand not only color scheme, but also ensure that the solutions are suitable in chemical composition. Otherwise, you may get unexpected results. If the color initially turns out bright when mixing paints, then over time it begins to darken and turn gray. For example, a combination of lead white and cinnabar red color initially gives a bright pink, but after a while it will lose its saturation. This also applies oil paints. They are very susceptible to solvents.

The most the best option To achieve a high-quality rich color scheme is to combine a minimum amount of paints. Comparability of materials is required. A color mixing table will help you select them.

Traditional palette mixing options

When getting a color yourself, you need to know the rules for mixing paints. Let's look at common options for getting the desired color.

Reds

Red is a representative of the main color. To obtain different red shades, you must follow the following rules:

• The tone of carmine, which is as close as possible to fuchsia, is combined with yellow 2:1. The result is red.
• Combining pink with yellow produces orange.
• To get scarlet, you need to take red and yellow in a 2:1 ratio.
• To achieve a red palette with a soft effect, red and pink paint are mixed. To achieve a lighter tone, it is better to add white paint.
• If you add dye to the main red paint dark color, then we get burgundy.
• You can achieve dark red by mixing red and purple colors in a 3:1 ratio.

Blue

There are primary colors, which include blue. To obtain the desired blue color, you must use this primary color. We get blue by adding white to the blue palette. With increasing volume white shade will become lighter. To obtain a moderate tone, use turquoise instead of white.

To obtain blue colors and shades, you must follow the following scheme. Add to blue:

• yellow and we get blue-green;
• red, we end up with purple;
• orange will provide gray;
• black will give the opportunity to form dark blue.

Greens

How to properly mix paints to obtain green and its shades. The basic rule is to mix yellow and blue dyes. A bright palette of green shades is achieved by combining primary colors in different volumes and adding additional dyes. Additional colors are black and white.

How to get khaki color? To do this, two elements are combined: yellow and blue, with the addition of brown tinting. The amount of substance is important for the result obtained. Olive color can be obtained by taking green and yellow tones. Making a mustard shade is more difficult. Red, black and a little green are added to yellow.

Green is not a primary color. To obtain it, paint colors of yellow and blue are mixed. But, to obtain a rich green tone, it is necessary to use industrially prepared green paint. If you made green paint yourself, the tones will not be bright.

Mixing dyes that have white and green tints makes it possible to get light green, and if you add a little yellow, you can admire light green.

Other shades

Let's look at other tones. Which shade is one of the most popular? Gray tone is very often used in the interior. It turns out if black is mixed with white. The more white, the lighter the result will be.

Gray, which has a silvery metallic tint, is also very often in demand. When mixed, a silver color can be obtained if you use different additives, for example, antimony.

So, in order to have the color that suits a particular interior, you need to mix dyes. The recommendations given above will tell you which colors to mix to get everything right. The resulting colors will delight the owners for a long time.

How to get the right shade (1 video)

Knowledge of color mixing options can be useful not only in professional activity artists. Individual design of a living space often poses the question to the designer of how to achieve this or that interesting undertone. The proposed combination options and color mixing table will help you achieve the desired effect.

Everyday life is filled with a wide range of different colors. To get the right one, you need to know the intricacies of combination.

Blue, red and yellow paint are the three pillars on which a wide palette of halftones rests. It is impossible to form these colors by mixing other colors. At the same time, combining them with each other gives an unusually large number of combinations.

Important! You can create a variety of shades by mixing only two colors by changing their proportions.

Depending on the volume of one part of paint added to another, the resulting result approaches one or another original color. One of the most famous examples is the mixing of blue and yellow, resulting in the formation green color. The resulting result, when adding new portions of yellow paint, will gradually change, getting as close as possible from green to yellow. You can return to blue by adding more of the original element to the green mixture.

Mixing chromatic colors that are located close to each other on the color wheel produces a paint that does not have a pure tone, but has an expressive chromatic hue. Combining colors that are on opposite sides of the chromatic circle will result in an achromatic tone. An example is combining orange or purple with green. That is, a mixture of colors located closely in the color wheel gives a rich chromatic shade; the maximum distance of colors from each other when mixed leads to a grayish tone.

Individual paints, when interacting, produce undesirable chemical reaction, which may result in cracking of the decorative layer. IN in some cases the resulting background may darken or gray. A good example is the mixture of white lead and red cinnabar. The attractive pink color darkens over time.

It is optimal when the impression of multicolor is achieved by mixing a minimum number of colors. At the same time, it is important to consider which paints, when mixed with each other, give a lasting result, and which ones are unacceptable to combine. The knowledge gained allows us to eliminate paints that fade or darken in the future from work.

The table of unwanted mixtures below will help reduce the risk of erroneous combinations:

Having tried the examples given in practice, future painters and designers will gain valuable professional experience.

Methods for obtaining red and its shades

Red is one of the three primary colors and is necessarily present even in minimal sets. But for mass printing, magenta tone is used. The answer to the question of how to get red is quite simple: mix the proposed magenta with yellow in a 1:1 ratio. There are other options for getting red when mixing paints:

The main red is located in the center. Next are the options for mixing. The next circle is the result of combining the first two colors. In conclusion, color options are presented when added to last result red, black or white paint.

Blue and its shades

Blue is considered a primary color, so to form all its shades you will need blue paint.

Attention! No combination of other colors produces a shade of blue, so the presence of this paint in the kit is mandatory.

Even with a set of 12 colors available, the question periodically arises of how to get blue. The classic tone is called “royal”, and comes with acrylic paints Often the main color is ultramarine, which has a bright dark shade with a purple undertone. A lighter effect can be achieved by mixing blue and white in a 3:1 ratio. Increasing the white leads to a lighter tone, up to a sky blue. If you want to achieve a moderately rich result, dark blue paint mixed with turquoise.

Let's look at what colors need to be mixed to get shades of blue:

• The effect of a dark blue-green tone is achieved by mixing blue and yellow paint in equal proportions. Adding white paint will result in a lighter shade while reducing the brightness due to the combination of the 3 elements.
• The creation of “Prussian blue” is carried out by mixing 1 part of the main blue and adding 1 part of a composition of bright green and light green. A rich and deep shade can be diluted with white, and its purity will not change.
• Combining blue and red in a 2:1 ratio produces blue with a hint of purple. Adding white allows you to lighten a dark and rich tone.
• Royal blue is distinguished by its brightness; a similar effect is achieved by mixing the main blue with mangento pink in equal parts. An admixture of white traditionally brightens the result.
• The combination with orange gives a gray mass. Replacing orange with brown in a 1:2 ratio to the base creates dark color with a complex gray-blue tint.
• The formation of dark blue occurs with the help of an admixture of black in a ratio of 3:1.
• You can create a blue tone yourself by mixing the main color with white.

A small table of combination options is presented below:

Green color palette

Solving the problem of how to get green if it is not in the set is quite simple: combine yellow and blue. A rich palette of green halftones is created by changing the proportions of the original components and adding additional elements that perform the function of darkening or lightening. Black and white paint plays this role. The olive and khaki effect is achieved by mixing two main elements (yellow and blue) and a slight admixture of brown.

Comment! The saturation of green depends entirely on the quality of the constituent elements: intense tones of the source materials guarantee a bright result.

If green is obtained by mixing, then all subsequent undertones will be duller. Therefore, it is better to experiment with the range of green if you initially have a ready-made primary color. There are many combination options:

• A combination of blue and yellow in equal proportions produces a grassy green.
• Increasing yellow to 2 parts and adding 1 part blue results in a yellow-green effect.
• An experiment on the contrary in the form of a blue-yellow proportion of 2:1 will allow you to obtain a blue-green tone.
• If you add ½ part of black to the previous composition, you will achieve a dark green effect.
• A light green warm tone is formed from yellow, blue and white paint in a ratio of 1:1:2.
• For a similar light green shade, but a cool tone, you need to take yellow, blue and white bases in a 1: 2: 2 ratio.
• Dark olive color is formed by mixing equal parts of yellow, blue and brown paint.
• The gray-brown tone is obtained from similar elements in a ratio of 1:2:0.5.

The expressiveness of the green color is directly dependent on the original elements; accordingly, the brightness of the halftones is based on the saturation of the green. The graphic palette gives a clear idea of ​​the mixing options:

As in the case of the red circle, the main paint is located in the center, followed by mixing options, then the result of the experiments. The final circle is the shades of the previous level when adding base, white or black paint.

Other combination options

There are many other techniques to create the desired effect by adding some kind of dye to the base color. The answer to the question of how to get ivory color is multifaceted and depends on the surface where you plan to apply the paint. The simplest option is to mix snow-white basic basis with yellowish. For example, yellowish ocher or a minimal amount of strontium is added to white. To tint paper, a small amount of potassium permanganate is diluted in water. A light pink tint indicates a correctly diluted solution. A cotton swab, brush or sponge is moistened with the resulting composition, after which the surface of the paper is treated.

Advice! For double-sided tinting, the sheet can be dipped in a container with a solution of potassium permanganate for a couple of minutes. After drying, it will acquire the desired ivory effect.

There are also several ways to get black:

• by mixing the three basic colors of red, blue and yellow;
• when combining cyan, magenta and yellow;
• a combination of green and red, but the result will not be 100% clear, but only close to the desired effect.

We will try to answer the most popular questions about mixing options:

• How to get raspberry color: the base is blue with the addition of red, white and brown tones.
• You can get turquoise color, whose second name is aquamarine, by mixing blue and green. Depending on the proportions, the tones of the new shade range from soft pastels to intense and bright ones.
• How to get yellow? It is a basic color and cannot be obtained by combining other colors. Something similar to yellow can be created with watercolors by combining green and orange or red. But it is impossible to achieve purity of tone in this way.
• How to get brown tint? To do this you will need basic paints: red, yellow and blue. First, a small amount of yellow is added to the red (in an approximate ratio of 10:1), then the volume is gradually increased until an orange tone is obtained. After which they proceed to the introduction of the blue element, 5-10% of the total volume will be enough. Minor adjustments to proportions will produce a wide variety of brown effects.
• Combining black and white elements in different proportions gives a diverse range of gray tones.

As you can see, there are options to achieve the desired effect in creative process an innumerable variety of designs. The information presented will be supplemented by a table with options for mixing colors and video: