How to make an even outline of a drawing in Photoshop. Learning to draw a contour on glass

Instructions

Select outline in Photoshop possible in several ways. The simplest one involves using the “Magic Wand” - Magic Wand. In the Components palette, its icon looks like a stick with a star at the end. To correctly highlight contours, the Magic Wand must be configured correctly. Set the Tolerance parameter in the tool properties to 30. This value will allow you to confidently separate the contour of the desired image from the background.

Working with the Magic Wand is very simple. Bring it to the edge of the object whose outline you want to select and left-click. The outline of part of the image will be highlighted. Now press Shift and, while holding the key, left-click again near the part of the image that has not yet been outlined. Pressing Shift allows you to drag the already selected path further. Continue in the same way to create the outline. If you make a mistake, switch the layout and press Ctrl + Z - the last action will be undone.

When the outline is closed, proceed to editing the selection. It may be needed if in some areas of the image the contouring was performed incorrectly, and the contour cut off part of the image. Reduce the tolerance value a little, then move the Magic Wand to the part of the image captured by the outline. While holding down the Alt key, click the erroneously selected area with the mouse. The outline will be corrected. Now press Del, the existing background around the image will be removed and filled with the background selected in the Components palette.

To select more complex paths, especially ones that blend into the background, use the Lasso Tool. Select it, press the left mouse button and drag the tool along the perimeter of the selected image until the contour is closed. The disadvantage of this tool is that the selection is done manually and its quality is determined by how accurately you move the mouse.

In many cases, the Magic Wand and Lasso capabilities are not sufficient to accurately outline the contours of a complex object. For example, you need to cut out an image of a cat from a photograph, so that the mustache and... It is impossible to select every hair with a “Magic Wand” or “Lasso”, and it is not necessary - there are more for this handy tool"Feather".

Select the Pen Tool - Paths. Now, using successive mouse clicks, select the outline of the image element you need. Making it complex contour It’s quite labor-intensive, but the result is worth all the time spent. At the same time, do not try to highlight the smallest elements contour(like a cat's whiskers and fur), at this stage you need to select general outline. Close it by clicking the mouse one last time on the first point. You can now more accurately define boundaries with the Refine Edge tool contour. Considering that working with this tool is quite complicated, read about it in specialized articles.

Video on the topic

Sources:

Working with the Refine Edge tool
how to select a path in photoshop

For satin stitch embroidery, appliqué or homemade stained glass you need contour drawing. Craft kits usually contain a certain number of drawings. However, if you want to do something original, draw the outline yourself. Adobe Photoshop allows you to do this even for those who are not confident in their artistic abilities.

You will need

- computer with Adobe program Photoshop;
- Internet access;
- scanner;
- Printer;
- mascara;
- aluminum or bronze powder;
- glue for glass;
- tracing paper.

Instructions

Choose a suitable drawing. Scan your postcard or photo at 300 dpi. You can also find a suitable image on the Internet. The plot can be anything, but try to find a picture with not too many small parts. You will still remove the extra lines later, but at the same time the image of what you are going to embroider or draw should be preserved.

In the small rectangular panels, find the one with brushes on it. Activate it. Drag it to the top panel or leave it where it is. But in any case, fill in the parameters. Select a round hard brush and set its size. If you haven't dragged anything anywhere, there is an arrow to the right of the panel name. Click on it and a window will open in front of you where you need to enter the size. If the outline lines are thin, select 2 or 3. There you will also find the Opacity box. Set to 100%.

Remove unnecessary black spots from the image. This can be done in different ways. The most understandable for the uninitiated is to find a selection in the left menu, where the tools are indicated. Usually this is the upper left square. Find the 2 squares below that represent colors. In your case it is black and white. White should be at the bottom. Use your mouse to highlight the area you want to clean and press the "Delete" key. Remove smaller specks using the eraser, which you will also find on the side panel.

Draw in the missing lines using a brush. Circuit drawing must be continuous. Draw, if necessary, additional lines - flower stamens, house stones, etc.

Determine what size you need drawing. In the "File" menu, set the options for printing. If you really need large drawing, and the printer only allows you to print in A4 format, divide your sketch into several parts. Print each part separately, forgetting to mark the places for gluing.

Video on the topic

Helpful advice

Transfer the embroidery design onto the fabric using carbon paper, crushed chalk or stylus. In the first case, it is simply outlined. Place the carbon paper as a layer of paint on the fabric. To transfer a drawing using chalk or stylus, prick it along the contour with a needle. Make punctures at a distance of 3-5 mm from each other.

If you want to make a homemade stained glass window, place the design on a horizontal surface and cover it with glass. To 5 parts of glass glue, add 2 parts of black ink and 5 parts of aluminum or bronze powder. It is better to take glue in a jar and one that does not set very quickly. This could be, for example, PVA. Sealant will not work, but you can try experimenting with liquid glass. Mix the ingredients. Apply the resulting paint along the contour with a soft artistic brush. The line should be convex so that the liquid varnish with which you fill the details of the design does not flow from one part of the stained glass window to another.

Sources:

how to make an outline on an image in 2019

Selecting a part of the image is required whenever you need to limit region using graphic editor tools. Photoshop offers a wide variety of ways to do this.

You will need

- Photoshop program;
- image.

Instructions

The most obvious ways to select a fragment of an image with a clearly defined shape include the use of tools such as Rectangular Marquee, Elliptical Marquee, Single Row Marquee and Single Column Marquee. Using Rectangular Marquee you can mark out a rectangular area of any size. To do this, turn on the tool, hold down the left mouse button and drag out the frame that limits the selection. If you need to select a square region, while applying Rectangular Marquee, hold down the Shift key.

To select an elliptical fragment, use the Elliptical Marquee tool. Holding down the Shift key while working will allow you to select a circular area of the image.

The Single Row Marquee and Single Column Marquee tools are useful when you need to select a vertical or horizontal row one pixel wide.

While working with an image in Photoshop, you may need to select region free form. Lasso group tools are suitable for this purpose. To use the Lasso Tool, hold down the left mouse button, circle the desired fragment of the image and close the selection by moving the cursor to its beginning.

Polygonal Lasso should be used when you need to select a polygon. Turn on the tool and, left-clicking, place anchor points in the corners of the fragment one by one. To close the selection, click on the first anchor point.

The Magnetic Lasso tool is used to quickly select areas with contrasting edges. Before you begin, set the value in the Edge Contrast field. With a small value of this parameter, the tool will respond to slight changes in contrast. Click on the edge of the selected object and, releasing the mouse button, circle the fragment. Magnetic Lasso will place anchor points on the edges of the area. If the last anchor point is not in place, delete it with the Backspace key. If necessary, place a point manually by clicking on the outline in the desired location.

In Photoshop you can select region image, taking its color as a basis, using Magic Wand. To use this tool, click on the area of the image containing the color based on which you are creating a selection. If the Contiguous checkbox is checked, only adjacent pixels will be affected by the Magic Wand. By deselecting this option, you will select all image fragments that fit the selected range.

When processing images, you often have to separately process shadows, midtones and bright areas of the image. To highlight them, you can use the Color Range option from the Select menu. By selecting the Highlights item from the Select list, you will select the bright fragments of the picture, the Midtones item will be needed for midtones, and Shadows – for shadows. Using Color Range you can highlight region, painted in an arbitrary shade. To do this, select Sampled Colors and specify a color in the image on the basis of which the selection will be created.

Video on the topic

Sources:

5 secrets of selection tools in Photoshop
how to select an area in photoshop

When working with images in the Adobe Photoshop graphics editor, it is impossible to do without selecting the entire image or its individual fragments. To implement this operation, the program has a whole set of tools, divided into several groups. Using them is not particularly difficult, but requires some practice.

You will need

Graphic editor Adobe Photoshop.

Instructions

If you want to select everything in a layer image to the height and width of the document, then first click on the line of this layer in the layers panel. The panel can be disabled by pressing F7 or selecting Layers from the Window menu to display this item in the Photoshop interface. Having selected the desired line, use the keyboard shortcut Ctrl + A or the “All” item in the “Selection” menu section. An animated dotted frame will appear along the edges of the image, showing the boundaries of the selected fragment. If you then move to another line in the Layers panel, the contents of the other layer will be selected.

The first step describes the only method that does not require you to select anything on the toolbar. And to select, for example, a rectangular fragment of an image, you first need to click the second icon on this panel - “Rectangular area” - or press the key with the letter M. Then, using the mouse pointer, specify the desired rectangular area in the image.

The mouse is also used to specify an oval or perfectly round selection on the image. To switch a tool from a rectangular format to an oval one, left-click its icon on the toolbar and hold until a four-line menu appears. Select "Marquee Tool" and then proceed as in the previous step.

To select a fragment of an image of any shape, use the Lasso tool - this is the next (third) icon on the panel. Instead of clicking on it, you can press the L key. closed area Draw selections with the mouse pointer. This tool has two variations, one of which, “Rectilinear Lasso,” allows you to select complex polygons, and the other, “Magnetic Lasso,” is very useful for selecting similarly colored areas of an image. You can select one of these options in the same way as in the previous step - when you press and hold the left button on the tool icon, a menu with a list appears.

The tools of the fourth button - “Magic Wand” and “Quick Selection” - are designed to work with image fragments that have the same color and color saturation. They are similar in action to the “magnetic lasso”, but when using these tools you only need to specify one sample point by clicking on it with the mouse pointer. After this, Photoshop will, at its discretion, select the entire area of points similar to the sample. Use the W key to enable this tool.

Video on the topic

When working with images in " Photoshop» you may need to cancel the previous action and return to the original picture. To return to the previous result, you need to perform several steps.

You will need

- computer;
- any version of Photoshop.

Instructions

Working with images is a fascinating activity that requires certain knowledge and skills from the photographer. But even an experienced Photoshop user often encounters situations when, while working on creating a new masterpiece, you need to go back a few steps.

You can make changes to the processed photo at any stage of editing. True, before starting work, you naturally need to open the image. To do this, just simultaneously press the keyboard keys Alt+Shift+Ctr+O or in the “File” menu on the work panel, select the “Open as” option, and then specify the location of the image and its format.

Next, proceed to the actual processing. And if you need to make changes and go back, look at the “Editing” section on the work panel. Here you can perform the necessary operations by selecting the appropriate option: “Undo”, “Step Back” and “Step Back”.

For convenience, you can use the “hot keys”: Ctrl+Z – to undo the last action, Shift+Ctrl+Z – to take a step forward and Alt+Ctrl+Z – to take a step back.

View the entire history of image changes in " Photoshop» is also possible by selecting the appropriate operation in the “Window” menu of the top panel. Check the “History” checkbox in this section, and a table will appear in the working window showing all the actions performed with the picture.

To cancel changes made at any stage of image processing, just find the desired operation on the “History” screen and return to it by left-clicking on it. In this case, you will end up at exactly the editing step you indicate.

If you need to save all previously performed actions in the photo, leave a draft version of the image for yourself. After all, you may still need it. And in order not to get confused, when saving, come up with a name for it that will help you easily navigate through all your photographs, completed and still at the processing stage.

Adobe Photoshop is deservedly popular among users who work with graphics. Using this program you can create very complex graphic works. One of the most common operations when working with an image is cutting out an element.

Instructions

Cut part of the image into Photoshop possible in several ways. If you just need a picture, run the program, open the desired image through the “File” menu item. There is a toolbar on the left side of the program window; select the “Crop” tool on it. Move the cursor to the area of the image where one of the corners of the cropped picture will be located and press the left mouse button.

Without releasing the button, move the cursor to the diagonally opposite corner; the frames will show the outline of the cropped part of the image. Don’t be afraid to set inaccurate dimensions; you can correct them by dragging the markers on the corners and sides of the selected area with the mouse. Then select any tool from the panel. A prompt will appear with three options: “Crop”, “Cancel”, “Do not crop”. To trim drawing, select the first one. If you want to change the cropping boundaries, click Cancel. Pressing the third button cancels the cropping operation completely.

If you need to quickly cut out a rectangular element, use the Rectangular Selection tool. Select the desired area for them, then copy it: “Edit” - “Copy”. Now you can paste the copied element into the same or another image. To insert accurately, first select the desired area with the same tool, then click: “Edit” - “Paste”.

If you need to cut out a fragment of an image with a complex shape, you can use several tools. The simplest of them is “Quick Selection”. For example, you need to select a round element. Select the Quick Selection tool and click on the edge of the circle. Then, without releasing the button, move the cursor to the opposite edge of the selected element. An uneven selection area will follow the cursor. Release the button. Now you can use your mouse to refine the selected area by dragging the outline in the desired directions.

The most complex objects are best cut out using the Pen tool. Select this tool, at the top of the window click on the Paths tool option. Now, using successive mouse clicks, create the outline of the element to be cut. Having closed the outline, right-click it and select “Create selected area” from the context menu. Now you can copy the selected element and paste it into another image.

The Pen tool has rich capabilities; it can be used to cut out even very complex image elements - for example, a fluffy cat. In this case, the program, following your commands, will automatically refine the edges of the image, highlighting the animal's fur and whiskers. It is better to read in detail about the use of “Pen” in specialized literature.

Sources:

Complex hair selection in 5 minutes in Photoshop CS5

If you were unable to spend the summer in a sunny country, but want to look tanned and rested in photographs, “” provides a convenient opportunity to fulfill this desire.

You will need

Computer with Photoshop installed, photography.

Instructions

Open the photo you want to edit in Photoshop. First of all, you need to highlight the skin. You can do this in several ways, choose one that is convenient and familiar to you. For example, using the Pen tool or through channels. If you use the first method, select the desired area by closing the path. Right-click on the selected fragment and select “Create selected area” from the drop-down menu.

Create a new layer by clicking the corresponding button in the layers panel on the right. You will see that a new layer will appear above the main one.

Decide how strong you want to make the photo. The best way is to look at photos of tanned people on the Internet, save the one that suits you, open it in the editor window and use the Eyedropper tool (in the left panel) to select the color you like.

Go back to your photo to make a fill on a new layer. This action can be called using the keyboard shortcut Shift+F5 or through the program menu: “Edit” – “Fill” (“Edit” – “Fill”). In the window that opens, select “Foreground Color” and confirm the action. No other parameters need to be changed or specified. You can also simply select the desired icon on the toolbar and click the mouse in the desired area. As a result of the filling, the area of skin you have chosen will be completely painted in the desired color. Don't be alarmed when you see that it doesn't look like a tan yet.

Change the blending mode to “Soft Light” and reduce the layer opacity so that the image takes on a natural look. This can be done in the layers panel in the top drop-down settings. Choose the transparency level yourself, depending on your preferences and the original skin color in the photo. Try different settings, move the slider, change the transparency and tan color to achieve the desired result.

If you are on initial stage If you highlight only the skin, you can already enjoy the resulting virtual tan. If you wear clothes along with your tan, you will have to complete one more step. For the new layer you created, create a mask to hide the clothing parts. This can be done by clicking on the corresponding button on the layers panel below. Then paint over the unwanted parts with black using the Brush tool. After this filling brown will not apply to clothing.

Photoshop is a very powerful program. With its help you can not only edit photos, but also engage in graphics, creation and drawing various figures.

You will need

Photoshop

Instructions

Open the image. Go to the menu “Filter -> Blur -> Smart Blur” (Filter -> Blur -> Smart Blur). Select Edges Only mode. Next, invert the colors. “Edit -> Correction -> Invert colors” (Edit -> correction -> inventirovat color). Or press Ctrl + I.

Create a new document: “File -> Create” (file -> new). Move the drawing there. Select the layer containing the drawing. To do this, go to the layers palette. Turn off the visibility of the background layer, that is, click on the eye opposite.

Right-click on the selected layer and select Blending Options. In the main panel, in the “Blend If” option, drag the white slider so that the entire image disappears. White color. Click OK.

Create a new layer so that it is on top of the others. Go to “Layers -> new layer” (layer -> new layer). Press Ctrl + E. Or from the menu select “Layers -> Link layers” (layer -> link layer). This action will completely displace the white color. Next you need to select figure. Press Ctrl and simultaneously click on the first layer window.

When processing and creating images with and without captions in a graphics program, it is often necessary to highlight the boundaries of objects, separate them from the background, or simply draw an outline. For all this, you can use a stroke in Photoshop or paint along the contour with a brush. This article is devoted to how to do this.

Two ways to create a stroke

There are two ways to make a stroke in Photoshop: selecting the boundaries of the layer using one of the specially provided effects and drawing a vector outline. The first method is most often used to visually emphasize the boundaries of objects and to separate them from the background (most often this is necessary, for example, to highlight text on a colorful background). The second method is used more for drawing, especially when creating clear geometric shapes.

Stroke a layer in Photoshop

Stroke in Photoshop primarily refers to a layer effect. This layer can be either an image, a fragment of it, or letters written with the Type tool.

To apply this layer stroke effect, you need to do the following.

Select layer.
In the menu item of the “Editing” tab, select “Stroke”.

A dialog box will open where you will need to configure the stroke parameters and confirm the command by clicking the “Yes” button. A stroke will be created in Photoshop, the corresponding layer will be outlined, its borders will become visible.

Stroke parameters are easy to adjust, and there are quite a lot of possibilities here. This includes adjusting the line thickness, choosing a color, and setting where the line should go:

along the layer boundary from the outside;
so that the border is its center;
along the border inside.

You can also set the mode - like any fill (color, pattern or gradient). By combining these and other program tools, it is easy to achieve a wide variety of effects.

The great thing about this stroke method is that its parameters can still be adjusted later, so you can return to this layer effect as the image as a whole changes. Let's say, if you decide to lighten, and the stroke no longer harmonizes with it, it can be adjusted and adjusted.

Its second advantage is that this effect can be copied and applied to other layers or other images, or new ones can be created based on it.

Another Stroke Dialog Box

The second way to stroke a layer is to select the “Layer” menu item, and then “Layer Style”. A window will open showing all the parameters that can be set to the layer style. Among them you need to select “Stroke”.

The same window with styles is called up by clicking the “Add Layer Style” button in the “Layers” window.

Calling this general window with styles through the menu, of course, is not very convenient, and if you use stroke often, then for dynamic work you should set a key combination for this window.

To do this, go to the “Editing” menu, then “Keyboard Shortcuts”, find one of the above paths through the menu items and set a combination that is convenient for you.

The reason for the existence of two Stroke dialog boxes

The two alternative windows for creating a layer effect are similar to each other, so many people are confident that they are working with the same tool. However, this is a misconception. The fact is that these are different windows that create different strokes, and it is by combining these two commands that you can draw two adjustable paths around the same layer. This is especially often required for outlining text.

Stroke along the contour

How to make a stroke in Photoshop? The second way is to create an outline and draw it.

In Photoshop, a path is a vector line that specifies the direction of brush movement. That is, stroke in this case is drawing with the selected brush along a given path.

Use the Selection Tool, Lasso Tool, or Magic Wand Tool to select the portion of the image you want to trace. Through the “Window” menu item, call up “Outlines”. In this window, find the “Make a work path from the selected area” button. In the "Tools" panel, select the "Brush" tool, set its parameters (shape, color, etc.). Then in the Paths window, click the Stroke Path with Brush button. The area you previously selected will be outlined. After this, delete the outline.

Thus, to stroke along the contour, you do not need to create a new layer; it is enough to define a stimulating line along which the program will draw with the brush of your choice.

Please note that the stroke in this case will be placed on the layer you specify, including the new one.

Outlining text

The possibilities for customizing the Brush tool in Photoshop are very rich, because you can adjust the intervals, texture, dynamics of shape and color, etc. At the same time, this line will differ in maximum accuracy from drawing by hand, and this process will take much less time.

To outline text, you must first select its layer and then convert it - like a regular selection area - into an outline. After creating a new layer, you can experiment and draw along the line with any brush with any settings. Do not forget that for artistic purposes, you can apply various effects to the resulting stroke, as to a regular layer, place it above or below the text, change its transparency, etc.

The two methods of outlining described above are not interchangeable, but complement each other. The advantage of the first is that the line can be adjusted and then returned to the adjustment, as well as copied and applied to other layers, including in other files. The advantage of the second is that the stroke in Photoshop will look more artistic, since there are no restrictions in the choice of brushes.

You will need

- computer with Adobe Photoshop program;
- Internet access;
- scanner;
- Printer;
- mascara;
- aluminum or bronze powder;
- glue for glass;
- tracing paper.

Instructions

Choose a suitable drawing. Scan your postcard or photo at 300 dpi. You can also find a suitable image on the Internet. The plot can be anything, but try to find a picture with not too many small details. You will still remove the extra lines later, but at the same time the image of what you are going to embroider or draw should be preserved.

Draw in the missing lines using a brush. Circuit drawing must be continuous. Draw, if necessary, additional lines - flower stamens, house stones, etc.

Determine what size you need drawing. In the "File" menu, set the options for printing. If you need a very large drawing, and the printer only allows you to print in A4 format, divide your sketch into several parts. Print each part separately, forgetting to mark the places for gluing.

Video on the topic

Helpful advice

The Phoroshop program, in addition to its wide possibilities for processing ready-made images, such as photographs, provides many different possibilities for drawing. You can draw with pencil and brush tools. This immediately creates raster image. You can correct what you have drawn by erasing the created elements with an eraser.

The Pen Tool is designed for drawing vector paths. Vector contours can be saved, edited, enlarged, reduced. The possibilities of this tool are endless. But mastering how to work with it is not easy.

What are contours and why are they needed?

Contours are vector line objects, utility objects that allow you to easily and quickly create interesting images. IN general case a contour consists of one or more straight or curved segments. Anchor points mark the position of the end points of path segments. The shape of the path segments is determined by the guides extending from the node points.

Outlines themselves in Photoshop have neither thickness nor color. They are an auxiliary tool for performing various actions: selecting complex shapes, constructing images, for curvilinear arrangement of text (along some curve), etc.

The contour can be closed, having neither beginning nor end (such contours include ellipses and arbitrary polygons),

or open, having separate end points (for example, a zigzag or wavy line).

Contours are saved in the current document together with raster objects. All contours in the document are available in the palette Paths.

What can you do with the contour?

1. Construct any outline, trace it (Stroke Pass command, right-click on the outline - select from the menu) to form a line (specify the stroke tool, having previously selected the color, thickness and other parameters);

2.If the contour is closed, you can paint the inner area with any color (Fill Pass command, right-click on the contour - select from the menu) or convert the contour into a selection (Make Selection command, right-click on the contour - select from the menu).

Drawing shapes (rectangles, ellipses, etc.) is essentially drawing inline contours of a certain shape, the inner area of which is painted in a selected color.

How to draw a free-form outline?

You need to draw the outline with the Pen Tool.

To draw a straight path, you determine the position of the nodes of the path with mouse clicks, and Photoshop automatically connects them with straight lines.

To create a curved segment of a contour, you need to click the point at which the direction of the curve changes and, without releasing the left mouse button, move the pointer. A guide will appear on the canvas (it determines the bend of the segment) and a curve that will smoothly bend as you move the mouse. When the curve takes the desired shape and size, you need to release the mouse.

If you hold down the Shift key while working with the tool, a contour of the correct shape will be created (adjacent corner points will be located at angles that are multiples of 45°, and smoothing points will be placed on the arc of an imaginary circle).

Pen Tools

The Photoshop toolbar tool Pen Tool includes several tools:
Pen Tool (Pen) - designed for drawing a vector contour (the contour is specified by a set of its anchor points);
Freeform Pen Tool (Free pen)- intended for drawing a vector contour (the contour is specified by a set of hand-drawn lines);
Add Anchop Point Tool reference point) - designed to add new anchor points to an existing vector path, with its help you can change the shape of the path, move nodes or guides;
Delete Anchop Point Tool - designed to delete existing anchor points from a vector path; it can also be used to change the shape of the path, move nodes or guides;
Convert Point Tool (Angle) - designed to change the type of anchor points and the shape of existing vector contours.

By default, the Pen Tool is active in the “Pen” group; to select another tool in this group, you need to right-click on the group button (hold it down for a few seconds), and then click the name of the required tool in the menu that appears on the screen.

A hotkey is also used to call up the tools of the Pen group. "R". Pressing this key activates the last used tool in the group. To switch between instruments in a group, press the key simultaneously "R" and a key "Shift"(as a result of each click, the next tool in the list is activated).

Pen tool options panel

In the tool options panel Feather The following elements must be noted:

Then, using the corresponding buttons, you can go directly from the options bar to the Pen Tool, Freeform Pen Tool, Rectangle Tool(Rectangle), Rounded Rectangle Tool (Rectangle with rounded corners), Ellipce Tool (Ellipse), Polygon Tool (Polygon), Line The buttons are responsible for setting one or another mode for combining contours (new contour, adding to an existing contour, subtracting, intersecting contours, etc.) and are similar to the same tool settings discharge.

There are buttons for Shape Layers mode

Style- is intended for selecting the style that will be used when decorating the outline fill. By clicking the expand list button, you can view available samples of Photoshop CS4 styles
Field Color- designed to display and change the fill color of the outline. When you click on a field on the screen, a color selection dialog box appears in which the user can specify the desired fill color for the outline.

Did you find everything very difficult? Nothing like this! A simple example. Try it, everything will work out!

In this article, we'll look at how you can create an outline for text or an object in an image in Photoshop. This is not at all difficult to do and will take little time. Now you will see this.

How to make a text outline in Photoshop

Let's start with the fact that make an outline for the text in Photoshop. You can have an image with text written on it, or you can create the text yourself by choosing the appropriate size and font.

I wrote the following text using the Horizontal Type Tool and selected the settings for it that are highlighted in the image below.

Now we need to select our text. You can read about different selection methods by following the link. Since the text is monochromatic and quite contrasting in relation to the background, I will use the Magic Wand Tool.

In the tool settings, select the value “Tolerance” - selects an area with pixels of similar color, and uncheck the box next to “Contiguous” (Adjacent pixels). By unchecking the checkbox, you can immediately select all pixels of a similar color in the entire image, even if areas with a similar color are located in different places.

Click on the text with the Magic Wand. As a result, it will be highlighted. If we left the checkbox next to “Contiguous” (Adjacent pixels), then only one letter we clicked would be highlighted, and we would have to click on each letter to select it.

Now let's circle the text. Place the cursor over the selected area and right-click on it. Select "Make Work Path" from the context menu.

In the next window, set the tolerance value to “Tolerance” and click OK.

The text will be outlined with a thin line. To see it, in the Layers panel, hide the layer on which the text is written - remove the eye in front of it.

Make the text layer visible again. Now you need to create a new layer. To do this, in the layers panel, click on the “Create a new layer” button.

Leave the created layer “Layer 1” selected.

You can make a contour in Photoshop using various tools: “Brush Tool” (Brush), “Eraser Tool” (Eraser), “Smudge Tool” (Finger) and others. But before you do it, you need to configure the necessary parameters for the tool.

We will create an outline using the Brush Tool. Therefore, select it on the toolbar and set the desired parameters. I chose a stiff brush size 7 in light green.

After that, select “Path Selection Tool” from the toolbar.

Click inside the selected path and select “Stroke Path” from the menu.

In the next window, from the drop-down list, select the tool with which we will make the contour. Select the tool that you configured in the previous step. For me it’s the “Brush Tool”. Click OK.

The text will be outlined. In the example, with a light green brush.

To remove the thin gray line that originally outlined the text, press Backspace. In the picture, a dark stripe is visible through the light contour - this will remove it.

That's all - we made an outline for the text in Photoshop.

You can save an image on a transparent background, and then add it to any other, without white background. Read the article by following the link.

For this example, this is done like this: unlock the “Background” layer, delete the “Background” and “site” layers, save the image in *.png or *.gif format.

How to make an outline for an image

Now let's consider how to make an outline for an object in an image. Let's create an outline for this rose.

You can create an outline of anything: a person, a building, an animal.

Open the image or photo in Photoshop. Now you need to select the object. I'll use the Quick Selection Tool.

Select it and click on the rose. If an unnecessary part of the image is mistakenly selected, hold down “Alt” and click on it with the mouse to subtract this area from the selection.

When you select the desired object, right-click on it and select “Make Work Path” from the menu. Our rose will be outlined with a thin gray line.

In the layers palette, create a new layer and leave it selected.

Now proceed to setting up the tool with which you will make the outline. I will have a “Brush Tool” (Brush) size seven, black.

Select “Path Selection Tool” from the toolbar. Click the mouse inside the selected path and select “Stroke Path” from the menu.

In the next window, select the tool you configured.

If you turn off the visibility of the main layer, you get the following. You can delete a thin gray outline line using the Backspace key.

Now, with a thin brush, let's draw some outlines inside the image. Turn on the visibility of the rose layer.

We will draw on the layer where the outline is selected, so “Layer 1” should be active.

I chose black for the brush, size 4, and traced all the lines inside the rose.