How to check your internet connection on Android. What to do if mobile Internet does not work on Android

Many users can no longer imagine life without modern methods of communication. Messengers, YouTube, calling applications and quick access to any information are just a small part of what a simple Internet connection offers. Technology allows you to satisfy your needs 100%. But often users do not understand how to set up the Internet on their phone, or they do everything correctly, but errors occur.

We will give you simple instructions that will help you set up the Internet on any phone, no matter what mobile operator you use. However, first proceed with the recommendations only if the standard configurations do not work for you.

How to set up Wi-Fi?

Usually everyone tries to connect to the Internet via Wi-Fi. It's free, you get unlimited traffic and excellent speed of sending and receiving data. With home networks everything is simple, since you know the password to them, but with others it is not so easy. Public networks (that do not require an access code) are not available everywhere, and for others you need to know the password. If you are sitting in an establishment and there is a closed network there, find out the connection combination from the employees.

To activate Wi-Fi, do the following.

Attention! Some networks require you to sign in. Follow the instructions on the screen and you will succeed.

Remember that you should not make online purchases through public networks that do not have a password or log into accounts on various sites. Your signal can easily be intercepted and your login details or bank card information stolen.

If after these simple manipulations you have problems, then read ours on how to solve them and make the device connect to the access point.

How to start using mobile data?

You can configure mobile Internet through the “Settings” tab. However, this is not usually necessary. Almost always the operator sends them automatically. Immediately after installing the card and the first launch, you will only need to activate the mobile Internet in the quick settings panel in the curtain. Next, the smartphone will do everything itself and let you into the network.

If you were unable to connect automatically, you can set up the Internet on Android yourself.

Attention! If your SIM card is out of date for the 4G network, then the communication store will replace it for you free of charge or at a low cost.

Also, in order to manually set up the Internet on a new phone, you need to select a suitable tariff plan that would provide you with traffic under favorable conditions. You can order it by calling the operator or at any communication store. And don’t forget to top up your account regularly, otherwise you will no longer receive traffic.

Setting up APN on Android

Unfortunately, it is not always possible to quickly establish an Internet connection on a smartphone. First, you need to study the terms of your tariff plan. You can view it on the Internet or by calling your telecom operator. Also, to make changes, you need to know a number of parameters that we have collected for you in the tables below.

Now you need to fill in the required fields correctly. We have indicated all the data that needs to be entered below, copy the information to the new APN, and then save the access point.

Make sure the checkbox is opposite the desired item. The type of Internet connection: LTE or 3G is regulated in the previous menu, and also depends on what options are provided by the telecom operator.

For Russia

For Ukraine

Deleting Configurations

If you no longer need to connect to a certain point, you can quickly delete it or reset the parameters.

1. Open the Internet configuration menu as described in the second paragraph of the instructions above.
2. To remove an APN, open it, click on the three dots and tap on the “Delete APN” item.
3. To reset settings, go to the “Access Points” section, click on the same three dots and select “Reset settings”.

Using these methods, you can set up the Internet on a Chinese phone or any other. But remember that before moving on to manual settings, try to start using automatic ones, which almost always work correctly on all devices.

This is a very common problem on devices running the Android platform.

In any case, it would be useful to understand what the causes and solutions to this phenomenon are.

Banal reasons

Let's start with, perhaps, a number of the most banal reasons why the mobile Internet may not work.

Their list is as follows:

• Negative balance on the phone. To exclude this option, you should check how much money you have in your account. Depending on the operator, the method may differ.
  To find out how to check the account status on your phone, you should contact your operator. Most often, the SIM card has both a balance number and an operator number.

• The subscriber is outside the network coverage area. Another very simple and common reason. To rule out this option, you should look at the network indicator in your . An example of this can be seen in Figure 2.
  To fix this problem, there is only one way out - to go to a place where the device can pick up the signal normally. By the way, a weak network can cause the Internet to simply work very slowly.

Clue: If this indicator is always low, even if you walk the device close to a telephone tower, then the problem is not with the network, but with the device itself. Then you should just take it in for repairs.

• The “Data transfer” option is not enabled in the settings. All modern smartphones have this option. You can easily turn it off in the settings.
  True, depending on the specific smartphone model, the location of this item will be completely different. For example, in phones with a platform it can be found this way:
  • go to settings;
  • select “More...” (Figure 3.a);
  • go to the “Mobile network” menu (Figure 3.b);
  • check the box next to “Mobile data transfer” (Figure 3.c).

As mentioned above, in different operating systems this item will be located in different places, but its name will always be approximately the same.

• Automatic registration on the network did not occur after it had been absent for some time. This phenomenon can occur after a subscriber leaves the subway or simply returns from places where the Internet did not work.
  This is especially true for networks. In this case, there is also one and only way to fix everything and it is to restart your device, that is, turn it off and on again.
  Depending on the process, this process occurs differently, see the instructions.

Settings are wrong

To exclude this option, you should go to the Internet settings on your phone and find there items related to APN, that is, the access point.

Depending on the model, the location of this item may also differ, but APN will remain APN in any case.

To fix this problem, there are two ways:

1. Request settings from the operator.
2. Manually set up the network connection.

The easier option, of course, is the first option. To find out how to request such settings, you should contact your operator or go to your mobile operator's website.

Information on the most common of them can be seen in Table 1.

Table 1. Request numbers for obtaining Internet settings for the most popular mobile operators in Russia

As for other operators, you will need to call the operator and ask him how to get automatic Internet settings.

In most cases, the settings will be set automatically and the user will not even notice it.

Only at the end will he receive a message with something like this: “Congratulations! The Internet settings on your phone have been installed successfully."

It happens that you receive an SMS, when you read it, the “Install” button appears.

Accordingly, you need to click on it and the settings will be installed.

Manual network setup

With manual adjustment everything is somewhat more complicated. An example of finding access point settings on Android phones can be seen below.

Step 1. Go to settings, then select “More...”, which is shown in Figure No. 3.a, then select “Mobile network” (Figure No. 3.b).

Step 2. In the menu that opens, open the “Access Point (APN)” item, as shown in Figure No. 4.a.

Step 3. Click on the button to add a new access point. Usually it consists of a simple “+” sign, as shown in Figure 4.b.

Step 4. Fill in the fields “Name”, “APN”, “Username”, “Password”, which are highlighted in Figure No. 4.c.

As for the meanings of these fields, you should also find out about them from the operator; they are completely different for each network.

For the most popular operators, the values ​​of these fields can be seen in Table 2.

Table 2. Internet settings values ​​for the most popular operators in Russia

These menu items may be completely different depending on the phone. There are other reasons why the Internet does not work well or does not work at all.

The times when the Internet was available only to a few, and its speed and price left much to be desired, are long gone. Today, everyone can, regardless of which cellular operator they use. Mobile providers provide their customers with the opportunity to access the Internet through network modes such as EDGE, 3G or 4G. A wide variety of tariff plans and special options allow the subscriber to choose the most optimal offer for himself. Despite the fact that today the Internet is available to all segments of the population, many still do not know how to set up the Internet on their phone.

In principle, you do not need to make any settings as such. The operators made sure that everything happened automatically with minimal subscriber participation. As a rule, the operator sends automatic settings to the phone immediately after the first launch. That is, if you bought a new phone or SIM card, then after turning on the device, after a while you will receive an SMS with automatic settings. Moreover, sometimes accessing the Internet from your phone is possible without accepting these settings. If this does not happen in your case, which is also possible, then you need to order GPRS settings. The methods for obtaining Internet settings will differ depending on which operator you use. Below we provide instructions for setting up the Internet on MTS, Beeline and Megafon phones. These are the most popular operators in Russia and most Russians use their services, so they are included in our review. If you have another provider, you can get the necessary information on the operator’s official website.

How to set up Internet on your phone - detailed instructions

Before setting up the Internet on your phone, you should make sure whether your device supports the ability to access the global network. Almost all modern phones now have this capability. If you have a smartphone or tablet, then access to the Internet will definitely be possible. Internet connection is also provided on regular phones. It's very easy to check. If your device has a browser, then accessing the Internet from this phone is possible. Some may consider this information too banal and unnecessary, but among our readers there are also those who are just beginning to get acquainted with the capabilities of mobile devices, so a small omission should have been made. So, let's look at the process of setting up the Internet using the example of the most popular mobile operators in Russia.

Setting up the Internet on MTS

If, after installing the SIM card and turning on the phone, you still cannot wait for the automatic settings, and you cannot connect to the Internet, then you need to order the settings yourself. This is quite simple to do, just send an empty SMS to number 1234, after which several service SMS with Internet settings will be sent to your phone. In addition, you can order settings on the MTS website in the “Help and Maintenance” section. You can use it in a similar way.

There is another way to set up the Internet on your phone. Call the customer support center and follow the prompts from the automatic informant to order the settings. If you have a lot of free time, you can ask him to send service SMS messages with the necessary settings to your phone. If the option with automatic settings does not suit you for certain reasons, then you can configure the Internet manually. Don’t be alarmed, there is nothing complicated about this and you can easily cope with this task.

To set up the Internet on MTS, go to your phone settings, open the “Wireless Network” section and fill out the fields as follows:

• Profile name – MTS Internet;
• Access point (or APN) – internet.mts.ru;
• Data channel – GPRS;
• Username and password – mts.

Save the settings and restart your phone, after which you can go online.

Setting up Internet on Beeline

If you don’t know how to set up the Internet on your Beeline phone and the automatic settings didn’t arrive, then just like in the previous case, you can do everything yourself. First of all, you should check whether you have activated the “Package of Three Services” service; to do this, call the number 067409. If the service is not connected, then this factor may be the reason for the inability to access the Internet. The service is activated using a USSD request: *110*181#. If the “Package of three services” is activated, then order automatic settings by calling the number 0117. You can also order settings by calling 0611. Again, you can ask him to send you settings for the Internet, but in this case you will have to spend time waiting for a specialist’s response.

To configure everything manually, in your phone settings, open the “Wireless Network” section and do everything as follows (usually the information is provided by default):

• Name - Beeline Internet;
• APN - internet.beeline.ru;
• Login - beeline;
• Password - beeline;
• Network type - IPv4;
• Authentication type - PAP;
• APN type - default.

Setting up the Internet on Megafon

To order automatic Internet settings on Megafon, send an SMS with the number “1” to 5049. After a while you will receive an SMS with your profile settings. All you have to do is accept them and you will be able to use the global network. You can get the settings. But of course you can use the help desk. To do this, call 0500 and follow the prompts from the automatic informant. In addition, you can connect with a specialist. allows you to get answers to any questions, including numbers and Internet settings, but before using this method, do not forget that waiting for a specialist’s response can take a lot of time.

To configure everything manually, go to your phone’s settings x open the “Wireless Network” section, then fill out the fields as follows:

• Profile name – MegaFon Internet;
• Home page – http://www.megafon.ru/;
• Access point – internet;
• Authentication type – normal;
• Login and password are not filled in.

This is where we will end this article. Now you know how to set up the Internet on your phone. If you still have any questions, you can ask in the comments.

Everyone who has an Android device wants to have access to the Internet. After all, sometimes you want to kill time or just find something interesting. All Android devices, when they first connect to modern 2G and 3G networks, automatically receive settings for Internet access from the operator. But there are also exceptions. In which case? For example, if the phone was brought from abroad. This happens, everyone is looking for the reason on the Internet, and so we decided to write about it.

In order to set up GPRS/3G on Android, you need to go to “Settings” - “Wireless networks” - “Mobile network”. Here, if you accidentally turned off automatic detection of settings, you can turn them back on. How to do it? Go to the item “Communication Operators”. The search for operators is underway. After which you can click “Select automatically” or select your operator from the proposed list.

There is another option for setting up the Internet: you just need to call the help desk of your mobile operator and ask for automatic settings or send an SMS to a number that can be found on the operator’s website.

If after all this the settings are not determined, then there is another option - entering the settings manually. To do this, go to the “Access Points (APN)” item. Then click “Menu” - “New access point”. And enter the access point data, which can be found on the operator’s website. Most often there are the following fields to fill out:

Name - you can enter any name.

APN (Access Point):

For Russia

for MTS: internet.mts.ru

for BeeLine: internet.beeline.ru (if you are using a SIM card from a USB modem, then the APN must be replaced with home.beeline.ru)

for Megafon: internet

for Tele2: internet.tele2.ru

for Yota: internet.yota

For Ukraine

for Vodafone: internet

for Lifecell: internet

for Kyivstar: www.ab.kyivstar.net

Username

For Russia

for MTS: mts

for BeeLine: beeline

for tele2: no need to enter

for Yota: no need to enter

For Ukraine

No need to enter for all mobile operators

Password:

For Russia

for MTS: mts

for BeeLine: beeline

for Megafon: no need to enter

for tele2: no need to enter

for Yota: no need to enter

For Ukraine

No need to enter for all mobile operators

Please note that Ukrainian 3G/4G operators may have names and passwords issued upon conclusion of the contract.

If your operator is not on the list, you can find out the settings on their website. As a result of following one of the above methods, you should be able to connect your Android to the Internet. If it doesn’t work out, write in the comments, we’ll try to help as much as we can)
After entering the settings, make sure that mobile data transfer is enabled in the settings, and also make sure that you have money/megabytes in your account so that the Internet can work. If the Internet does not want to work, try turning off and turning on your smartphone/tablet again.
For Beeline, you may need to select only CHAP authorization, otherwise it may not connect to the mobile network at all, especially in the case of a device from a foreign market.
Settings - Mobile network - APN - Beeline internet - Authentication type: CHAP.

Sometimes operator codes (MNC) are not entered automatically, in this case you can enter them manually, this setting in Android is divided into two fields: MCC - for all Russian cellular operators 250, for Ukrainian 255, Belarusian 257, Kazakhstan 401. MNC - these are the last two digits of the operator code, for example, 25099 - for beeline, MCC 250 MNC 99

MNC for Russian operators:

01 MTS

02 MegaFon

03 NSS

05 ETC

11 Yota

12 BaikalWestCom

16 New Telephone Company

17 Utel (formerly Ermak RMS)

20 Tele2

35 MOTIVE

37 SkyLink

39 ROSTELECOM

99 Beeline

MNC for Ukrainian operators:

01 Vodafone


03 KYIVSTAR

05 Golden Telecom

06 Lifecell

Modern gadgets greatly simplify our lives, but what are they worth if they cannot be connected to the Internet? Yes, many users of mobile devices and smartphones. tablets and other devices, it’s hard to imagine life without access to the World Wide Web. However, the question arises, what to do if you purchased a brand new phone on Android OS, but don’t know how to set up internet on android?

Setting up GPRS/EDGE/3G/4G Internet on an Android phone

This article will help you understand not only the general features, but will demonstrate all possible settings options. Step-by-step actions will be offered, which will greatly simplify the task even for those who have never encountered such a task before.

Where to start

Initially, you should decide what exactly you need from network access. This will be your starting point.

If you need network availability and mobility, this is one thing, but if we are talking about connection speed, then things are a little different. Regular web surfing and a primitive Android update are completely different things and this must be taken into account.

If we talk about the first option, then everything can be done to make the Internet faster and more productive. As a rule, to do this, all possible display elements on the resource are disabled through special settings.

The second option involves the so-called end-to-end connection via WiFi (that is, a wireless network). Using the second option, you significantly save not only traffic, but also money.

We will consider both options.

How to enable network access

This is the first practical step you need to take. Having mastered it, you can easily connect to the network at any time and disconnect it if necessary. Let's look at the most common network connection options:

Connect using a wireless WiFi network.

Here you should select the settings menu on your gadget. To do this, turn on the phone and drag down the top menu with your finger, as shown in the following figure





Now you need to click on the gear, which will take you to the settings menu



Here you should take into account the fact that icons may differ in different versions of Android, but it will still not be difficult to find it.

Now we see almost at the very top the WiFi inscription and a kind of switch on it. We need to move the slider from the Off position to the On position. In some versions, the translation is made from 0 to I. This is the same thing.



That's it, now we are connected to the Internet via a wireless network. Now tap on the Wi-Fi icon, a menu will open where you can enter the necessary data for configuration or select the available network options



Of course, you are unlikely to get on a free network, and therefore you need to know the password. Then you select the required network name, for example “Megaline_1” and enter the code



That's it, now the Internet should work.

Here you should focus on the fact that there are cases when it is not possible to automatically connect to the desired network and there is a need to manually enter data, as we showed above in the screenshots. This puts many people into a real stupor, but there is nothing complicated here, especially since we will now analyze this point.

Let's go to Settings->Net->Wi-Fi Settings. We showed how to get here in the images just above. You need to add a new Access Point or an existing one, but manually. To do this, you need to at least know its SSID (in other words, its exact name), password and security mode.

We will not consider the WPS key, which distributes the Internet to those who wish, in public places. If they want to give you access to this network, then you won’t have to click anything.

Actually, this is where the setup via WiFi ends.

Result: the option is in principle good and often free, but its main problem is that as soon as you move away from the distribution point, you lose the ability to connect and you need to look for a new source of free Internet.

This option should be used when you are at home and have a device that distributes the Internet via a wireless network;

Settings 3G/4G/GPRS/EDGE/ and Internet via communication provider on Android


Here things are much more complicated, especially for beginners. The task can be significantly easier if you go through automatic network settings provided by your operator for your mobile device. If this function does not work or it is not possible to identify the device (which often happens in the case of Chinese copies of well-known phones or their own models), then you must enter everything manually.

But there is another problem - the need to enter exact parameters for each operator. In this article we will provide settings for each type of popular providers.

We go to the network settings in the same way as we did with WiFi, only now we select “ other networks»





And we get to this menu, scroll down



Apparently there are 2 points below



Fill out the first paragraph



Fill in the second paragraph







That's all, now we see our Internet in the settings



There was also a very simple option for setting up using the most convenient Mobile.Yandex service. Now, for some reason, it either doesn’t work, or it works, but not correctly. What was its essence:

• Select the operator you use from the list, then enter the model of your smartphone or tablet;
• The number is indicated in international format;
• When you receive an SMS with the necessary settings, you immediately install them in your gadget.
• After saving the settings, your Internet will work.

Agree that this was not a very convenient method, but we were able to do it ourselves and learned how to set up the Internet on Android. At the same time, there is no difference whether you set up the Internet on a tablet or on a phone, since the Android OS system is the same!

How to enter parameters to connect to a mobile Internet operator

Setting up Rostelecom Internet on Android or setting up Internet on Android Tele2 is also easy. You just need to visit the official website of the required operator and enter the parameters. It will be even easier to call the operator, and he will dictate all the necessary data to you.

Result:Setting up the Internet on Android is not that difficult. But its effectiveness is many times greater than in the case of the first option. Just keep in mind that the cost of such Internet is quite expensive and not everyone can afford to constantly be on the Internet with very expensive tariffs.

How to choose an operator for mobile Internet

A frequently asked question on the Internet, much like the question, is how to set up an Internet connection on Android. Study all the offers from different operators, look at promotions, bonuses, profitable programs for providing mobile communication services, study all the packages and then make a choice.

Conclusion: I recommend that you use both options. WiFi will allow you to update the system, download applications, chat on Skype, even watch videos or listen to music online. And the second option is ideal for surfing the vastness of the global network. However, do not forget that it all comes down not so much to money, but also to what you want to get from your Internet.

Thank you all if the article was useful to you say Thank you!

Still have questions? Ask!

Were you interested in this news?